Two Energy Quotes, One Honest Total: How to Compare Before You Sign

    energy
    contracts
    small business
    Two Energy Quotes, One Honest Total: How to Compare Before You Sign

    The quote that looks cheaper and isn't

    Two energy suppliers send you renewal offers on the same morning. One shows a lower unit rate. The other has a higher rate but a shorter term and no exit fee. You have a shop to open, so you pick the lower number and sign. Eighteen months later, a clause you never read turns that "cheaper" deal into the more expensive one.

    Business energy contracts are built to be skimmed. Unit rates, standing charges, deemed rates, bonds and termination fees all sit in different places, and nobody gives you a single total. That is a job a language model does well, as long as you hand it real numbers and ask for the arithmetic to be shown.

    The prompt

    The prompt is here: Compare Two Business Energy Contract Offers Line by Line. You paste in twelve months of usage, your current contract, and both offers. It returns the total cost over each full term, every clause that could raise the real cost, and a plain recommendation.

    A worked example

    Take a small bakery using 38,000 kWh of electricity a year, trading six days a week with a peak in December.

    Offer AOffer B
    Unit rate24.0p25.5p
    Standing charge68p a day52p a day
    Term36 months24 months
    Exit feeYes, 20% of remainingNone
    Bond£1,200None

    Offer A wins on the headline rate. The prompt works out the yearly cost for each: A comes to about £9,370 and B to about £9,880 at the current usage. A is cheaper by around £510 a year. Then it runs the awkward cases. If the bakery moves premises in month 20, the exit fee on Offer A is roughly £4,700 of remaining spend, which wipes out the saving several times over. If usage rises 20 percent, B's lower standing charge narrows the gap but A still leads.

    So the answer is not "pick A" or "pick B". It is "A is cheaper if you stay put for three years, B is safer if there is any chance you move". That is the sentence a human adviser would give you, and it came from the clauses, not the rate.

    Where the value is

    • Time: reading two contracts and building the comparison by hand takes an hour or more. This takes minutes.
    • Errors avoided: exit fees, deemed rates and bonds are the usual sources of surprise bills, and the prompt hunts for them by name.
    • Better questions: it writes three questions to put to each supplier before you sign, which is where negotiating room often appears.

    One caution. The model does the sums on what you give it. Check every price against the supplier's written quote, and treat the output as a briefing, not a contract review.

    How to use it

    1. Gather twelve months of bills and total the kWh for electricity and gas.
    2. Copy the unit rate, standing charge, term, fees and bond from each offer, and your current contract's end date.
    3. Paste everything into the prompt, fill in the bracketed fields, and run it in the model you prefer.
    4. Ask the supplier the three questions it gives you, then re-run with any revised figures.

    Run it before the renewal deadline, not after. Once you are on a deemed rate, the best deal is already gone.